STC-1000 110V Digital Temperature Controller

STC-1000 Temperature Controller

 
Elitech STC-1000 Thermostat Temperature Controller main functions as below: Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
          
Technical Parameters:            
 1. Temperature measuring range: -50℃~99℃;     
 2. Resolution: 0.1℃;     
 3. Accuracy: ±1℃ (-50℃~70℃);     
 4. Sensor error delay: 1 minute    
 5. Power supply: 110 VAC±10%, 50/60Hz;     
 6. Power consumption: less than 3W;     
 7. Sensor: NTC sensor (1PC);     
 8. Relay contact capacity: Cool 10A/110VAC;Heat 10A/110VAC;     
 9. Ambient temperature: 0~60℃;     
 10. Storage temperature: -30~75℃;     
 11. Relative humidity: 20%~85% (No condensate).        
    
Specification and Size:             
 1.Front panel size 75(L)×34.5(W)mm;     
 2.Mounting size:71(L)×29(W)mm;     
 3.Product size 75(L)×34.5(W)×85(D)mm;     
 4.sensor length 2 m included.     
 5.Measure range: -50℃+99℃    
 6.Mounting size: 71*29 mm    
 7.Auto switch between refrigerating and heating    
 8. Return difference value 

Package Content: 
1 x STC-1000 Temperature controller 110v
1 x 2M Sensorv
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
FAQ:
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.
2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0. 

Related Products